Thermal insulation covers and reels

P/N. 2100/A

Isotherm cover mod. Mousse Coibentata

Included perimeter rim, roller and towing hooks, eyelets and floating tubular.

Waterproof and insulating cover for swimming pools heated in order to contain the dispersion of heat

The systematic use of mousse cover delivers significant energy and cost savings

Feature Value Method
Weight 350 [m²] ISO 845
Tensile strenght: Warp 850 [N/5cm] ISO 1421
Tensile strenght: Plot 850 [N/5cm] ISO 1421
Thermal conductivity at 10 °C 0,028 [W/mK] ISO 2581
Thermal conductivity at 40 °C 0,042 [W/mK] ISO 2581
Water absorption (seven days) < 1 vol. % -


The technical data above are derived from accurate experimental tests of the manufacturer. Tollerance 10%

P/N. 2100/B

Isothermic rectangular cover mod. Mille Bolle

Included perimeter rim, roller and towing hooks, eyelets and tubular buoyancy

Material for the realization of thermal covers to be installed on the water of the swimming pools indoor / outdoor, act to reduce the loss of temperature and limit the use of chemicals.

Composition:
Low density polyethylene (LDPE), UV stabilized.

Feateure Val Metodo
Surface mass density 400 [g/m²] -
Gravimetric thickness 400 [u] ISO 4591
Strain resistance >100 [N/mm²] ISO 495/2
Bubble diameter 10 [mm] -
Height bubbles 4,7 [mm] -
Color BLUE -
Warranty 3 years -

The technical data above are derived from accurate experimental tests of the manufacturer. Tollerance 10%

P/N. 2100

Stainless steel cover roller

Manual roller:
Built with stainless steel AISI 304 or 316, with 1/2/3 rolls measurement diam. mm. 114x2, roller supports in tubular framework powder coated polyester white color, size mm. 50x50x2 mounted on 4 wheels in stainless steel and rubber pivoting independent (two with brakes).
Available also in stainless steel electro-polished version.

Roller with electric motor
Built with stainless steel AISI 304 or 316 and one roller diam. mm. 114x2, roller supports in tubular framework. mm. 100x100x2 powder coated polyester, white, mounted on 4 wheels in stainless steel and rubber pivoting independent (two with brakes).

Engine 24 Volt exterior cabinet with operating safety release, on request internal motor.
220/24 transformer

Italian production and raw materials origin.

All products comply with the FINA regulations and UNI EN 13451.

Newsletter

We don’t send spam. Your address will not be shared with third party.

Contact details

(+39) 045 6850007

(+39) 045 6858014

Viale del Lavoro 8, Arbizzano di Negrar, Verona, ITALY

Via Volta 1, Arbizzano di Negrar, Verona, ITALY

Calcultates the route

Competition pool's equipment and accessories

Industrial Services Italia srl
Viale del Lavoro 8, Arbizzano di Negrar, Verona, ITALY
P.IVA IT02722910235

Phone
+39 045 6850007
Fax
+39 045 6858014

Privacy & Cookie law